快马矿用车以公司MK70平台打造,国内市场首创,填补该类矿用车产品市场的空白。采用行业内得到广泛认可的玉柴发动机、法士特变速箱、车桥承载系统及舒适豪华的驾驶室。可用于冶金矿山、露天煤矿与铁矿、水利水电工地、有色金属矿山、建筑工地等场所的物料运输设备。
采用卷绕电池,无需加注电解液。该电池寿命是普通电池的2-3倍,长达2年的质保寿命保证您放心使用。
440马力发动机,合理的动力匹配,使该车拥有65km/h的车速,满足在同一场地不同车型混用时,速度效率的优化匹配。装载50T土方在8%的坡道上能达到15km/h,
U型斗结构,大大减轻整车整备质量,提高载重效率、增加运营效益。
驾驶室采用气囊减震器,比弹簧减震效果更好,使驾驶更舒适。
MK Fleeting Mining Truck from mining truck MK70 (of ZSVM) as a platform, being the domestic pioneer to fill the niche of the same type of coal dumpers. It adopts YUCHAI engine, which is widely recognized within the domestic market; FASTRE gearbox, axle load system and comfortable/luxurious driver’s cab. It can be used to transport materials for metallurgic mines, open-air coal mines and iron ore mines, water conservancy/hydropower construction sites, non-ferrous metal mines, and construction sites.
Spiral-wound battery loaded on this mining truck requires no supplement of electrolyte. This battery is able to survive one or two times longer than ordinary batteries and the two-year warranty assures your proper use during this period.
Driven by a 440 HP engine, and matched with appropriate powertrain, this truck is able to go at a speed of 65km/h. Also, this truck is easy to coordinate with other vehicles on the same ground to maximize efficiency. Loading 50T earthworks, it is able to climb 8% ramp at 15km/h.
The U-type bucket which greatly reduces the curb weight can improve load efficiency and increase benefits.
The diver’s cabin is equipped with air bag shock absorbers which are more effective than spring shock absorbers, so as to provide a more comfortable drive.
MK50两轴矿用车以公司MK70平台打造,国内市场首创,填补该类矿用车产品市场的空白。采用行业内得到广泛认可的玉柴发动机、法士特变速箱、车桥承载系统及舒适豪华的驾驶室。可用于冶金矿山、露天煤矿与铁矿、水利水电工地、有色金属矿山、建筑工地等场所的物料运输设备。
Biaxal mining truck MK50 derives from mining truck MK70 (of ZSVM) as a platform, being the domestic pioneer to fill the niche of the same type of coal dumpers. It adopts YUCHAI engine, which is widely recognized within the domestic market; FASTRE gearbox, axle load system and comfortable/luxurious driver’s cab. It can be used to transport materials for metallurgic mines, open-air coal mines and iron ore mines, water conservancy/hydropower construction sites, non-ferrous metal mines, and construction sites, etc.
采集多家大型露天煤矿、铁矿的使用环境,精心研发的短距离土石方、矿石转运的专用车辆。高效节油的发动机,宽速比的变速箱,高承载的平衡悬架及车桥,带管路预热的供油系统,三级六次过滤的进气系统,高强度的车厢,能够配套大型挖掘机施工作业,单车装载更多物料,减少矿区车辆运输密度,运输效率大大提高!
The special purpose vehicle is derived from the service environments of several large open-cut coal mine and foreign brands. Efficient & fuel-efficient engines, high-gear-ratio transmission, high load balance suspension and axle, oil-supply system with pipe-preheating, three-stage & six-passage air filtration system. High-strength bunker can operate with a large excavator and a single one of it can load more materials, thus reducing the density of mining vehicle transportation and greatly improving transport efficiency! The overall vehicle performance is tested following relevant national standards.
车辆型号 Model | MK60快马 |
驱动形式 Driving Model | 6×4 |
轴 距 Wheel Base(mm) | 3625+1550 |
发动机型号 Engine | YC6MJ440L-T20 |
变速器 Gearbox | 10JSD220A |
车 桥 Axle | Front 13T Rear 25T |
轮胎规格 Tyre Size | 13.00 |
整车整备质量 Kerb Weight(kg) | 23000 |
允许最大总质量Payload Capacity(kg) | 60000 |
车厢内部尺寸Inside Body Size(mm) | 5600×3000×1500 |
整车外形尺寸 Vehicle Shape Size(mm) | 8350×3235×3830 |
最高车速 Max.Speed(km/h) | 65 |
最大爬坡度 Grade Ability(%) | 45 |
最小转弯半径 Min.Turning Radius(m) | 11 |
车厢举升系统 Lifting System | MK Lifting System |
车辆型号 Model | MK50 |
驱动形式 Driving Model | 4×2 |
轴 距 Wheel Base(mm) | 4200 |
发动机型号 Engine | YC6MK340 YC6MK375 |
变速器 Gearbox | 10JSD160A 9JSD180A |
车 桥 Axle | Front 18T Rear 35T |
轮胎规格 Tyre Size | 14.00 |
整车整备质量 Kerb Weight(kg) | 17500 |
允许最大总质量Payload Capacity(kg) | 50000 |
车厢内部尺寸Inside Body Size(mm) | 4800×3000×1600 |
整车外形尺寸 Vehicle Shape Size(mm) | 7580×3280×3850 |
最高车速 Max.Speed(km/h) | 49 |
最大爬坡度 Grade Ability(%) | 40 |
最小转弯半径 Min.Turning Radius(m) | 10.5 |
车厢举升系统 Lifting System | MK lifting system |
Model | MK60 | MK70 | MK80 |
Driving Model | 6×4 | 6×4 | 6×4 |
Wheel Base(mm) | 3625+1550 | 3625+1550 | 3625+1550 |
Engine | YC6MK340 | YC6MK375 | YC6MJ-420 |
Gearbox | 10JSD160A | 12JSD180 | 9JSD220 |
Axle | Front 16T Rear 32T | Front 16T Rear 32T | Front 16T Rear 35T |
Tyre Size | 13.00 | 14.00 | 14.00 |
Kerb Weight(kg) | 23000 | 24000 | 26000 |
Payload Capacity(kg) | 60000 | 70000 | 80000 |
Inside Body Size(mm) | 5600×3000×1500 | 5600×3000×1600 | 5800×3100×1650 |
Vehicle Shape Size(mm) | 8320×3280×3850 | 8320×3280×3850 | 8570×3325×3850 |
Max.Speed(km/h) | 49 | 49 | 49 |
Grade Ability(%) | 40 | 40 | 40 |
Min.Turning Radius(m) | 11 | 11 | 11 |
Lifting System | MK lifting system | MK lifting system | MK lifting system |